• +371 29361149
  • This email address is being protected from spambots. You need JavaScript enabled to view it.

REHAU GENEO doors

Made in Latvia

REHAU GENEO doors

HighTech material for maximum stability without steel reinforcement
FIPRO, a fiber composite material, was created by REHAU. This type of material has already proven itself in the most extreme conditions in Formula 1 and in aircraft structures. We use this technology for our GENEO system and Nordic - Design Plus windows.
Patented profile core made of RAU-FIPRO provides maximum stability. In up to 90% of cases, we can do without steel reinforcement and thus achieve maximum thermal insulation without compromise.

Our HighTech material is fully recyclable. The construction of GENEO profiles, with a core made of composite material and an outer layer made of PVC, is ideal for reuse in a core of fiber-reinforced recycled materials.
We guarantee that, as part of our EcoPuls recycling program, unused profile parts and old windows will be collected and recycled again.

GENEO doors

Premium system with 86 mm installation depth and Ud-value up to 0.54 W/m²K

Our GENEO premium system can be used in many cases without steel reinforcement and thus without thermal bridges (white color and with hidden hinges) . In this way, the GENEO exterior door - combined with thermal modules and a door panel with a thickness of up to 53 mm, obtains an Ud value of up to 0.54 W / m²K.

Your advantages:
- Ease of use thanks to optimal for system equipment
- High investment security, meeting high thermal technical requirements
- Available in all color designs

Feel free to send your door and window measurements to our managers and receive an estimate

General

Visible profile height jamb/sash

169 mm

Visible width threshold and sash

203 mm / 86 mm
Number of cameras 5
Glass thickness max. 53 mm
Sliding sash size max. 300 cm x 270 cm
(W x H)
Profile design Plane deflected sash

Features

Heat insulation, Uf up to 0.54 W/m2K
Sound insulation fill dependent
Anti-burglary security (EN 1627) RC2
Resistance to wind loads (EN 12210) B2
Rainwater tightness (EN 12208) 4A
Air permeability (EN 12207) 3

Profile scheme:

GENEO lifting-sliding doors

Premium system with 86 mm
thickness and Uf-value up to 1.3 W/m²K

Our GENEO lift-and-slide doors with an element width of up to 10 m, a height of 2.70 m and a weight of only 400 kg are large patio doors. For a rich view of the open nature and conservatory glazing. When it comes to energy saving with thermal insulation values according to the passive house standard, GENEO also demonstrates its true size.

Your advantages:
- The best thermal insulation and excellent design
- High stability thanks to the HighTech material RAU - FIPRO
- Personalized sound insulation and anti-burglary resistance
- Excellent appearance thanks to the possibility of using hidden fittings
- Available in all color designs
- Environmentally friendly, recyclable

General

Visible profile height jamb/sash

169 mm

Visible width threshold and sash

127 mm (threshold height 20 mm)
Installation depth 86 mm
Number of cameras 6
Glass thickness max. 53 mm
Seal systems 2 dust seals and 1 middle seal
Profile design Plane deflected sash

Features

Heat insulation, Uf 1.30 W/m²K
Sound insulation Rw up to 43 dB
Anti-burglary security (EN 1627) RC2
Resistance to wind loads (EN 12210) B3
Rainwater tightness (EN 12208) 9A
Air permeability (EN 12207) 4
Save heating costs with new REHAU doors
You cannot influence rising energy prices, but you can reduce your personal energy consumption. By building house or when renovating a house, it is important to minimize heat loss as much as possible, thereby reducing heating costs and saving money. It is the door that is most often one of the places in the home where there is the greatest heat loss.
A lot of valuable energy is lost through poorly insulated doors, therefore, when choosing a door, attention should be paid to its energy efficiency. Heat loss through the door will be affected by both the size of the door and its quality. To save heat, it is recommended to choose multi-chamber PVC doors with the lowest possible door U-value (thermal conductivity coefficient), which retain heat well and are made of quality materials.

What are the benefits of choosing an energy efficient door?
  • Reduced heat loss in houses
  • Saved heating costs
  • Reduced impact on climate and environment
  • Careful treatment of resources
  • Increased home value

Contact our specialists and get a free offer for the manufacture of PVC windows:

Māris Pavārs

PVC REHAU WINDOW MANUFACTURE AND INSTALLATION MANAGER

Jānis Riekstiņš

PVC REHAU WINDOW MANUFACTURE AND INSTALLATION MANAGER

Gints Bikše

PVC REHAU WINDOW MANUFACTURE AND INSTALLATION MANAGER

We work with "Rehau" (German quality) technologies

Image

Contacts

MJ Logi offers: Production, installation and repair of PVC windows and doors.

Working time:

Production, accepting orders:
Monday - Friday: 8.00-17.00

Urgent window repair, glass replacement:
24/7 without holidays

Form of communication

You can contact us here:
Please fill in the required field.
Please fill in the required field.
Cookie Policy:

We use cookies to improve your experience on our website. By browsing this website, you agree to the use of cookies. You can withdraw your consent at any time by deleting the stored cookies.